1. Welcome to the Painful Pleasures community! New members, please read the Rules of the Forum before posting. You should also introduce yourself here before submitting any other posts. If you're interested in sharing photos of your body mods, please read the Rules of the Gallery first. At any time, you can use the "Start a Conversation" feature to get private help from our moderators, Angel on the Edge, Dnd4evr, Rainbird, xXJarredXx, Revs, and Craftsman. Enjoy the forum!
    Dismiss Notice

Question about titanium adonized colors....

Discussion in 'Body Jewelry' started by danieyella, Feb 7, 2015.

  1. danieyella

    danieyella New Member

    Last edited by a moderator: Aug 7, 2017
  2. dnd4evr

    dnd4evr Super Moderator Staff Member

    Welcome to the Painful Pleasures community! Please take a moment to tell us a bit more about yourself in the Introduce Yourself area. Also, please read the Rules of the Forum at your convenience.

    The gallery is available for viewing or posting. Without a login you will be able to see non-mature content, but you will not be able to post there or view mature content.

    If you have any questions about the forum or gallery, feel free to reach out to me or our other moderators, Angel on the Edge, Rainbird, Craftsman and xXJarredXx.

    I see what you mean. It is likely somewhere around the 30V range (give or take 10V). Angel on the Edge may be able to help with this one and if not, I would write or call for help.

    If you want to figure this out on your own, here is what you can do. Anodizing halts when the thickness is enough to block the electrical current. If you start low (say 18V) and slowly go up a little at a time, you should find the setting that produces the color you want. I would guess it is somewhere between 22V and 25V.
     
    Last edited by a moderator: Aug 7, 2017

Share This Page