1. Welcome to the Painful Pleasures community! New members, please read the Rules of the Forum before posting. You should also introduce yourself here before submitting any other posts. If you're interested in sharing photos of your body mods, please read the Rules of the Gallery first. At any time, you can use the "Start a Conversation" feature to get private help from our moderators, Angel on the Edge, Dnd4evr, Rainbird, xXJarredXx, Revs, and Craftsman. Enjoy the forum!
    Dismiss Notice

Questions about My future P.A.

Discussion in 'Introduce Yourself!' started by aikidoka, Mar 11, 2017.

  1. aikidoka

    aikidoka New Member

    New here.
    In Florida.

    former piercings -- frenum 10ga -- nipples 12ga
    tatts -- 3

    44 years old and been wanting my PA for a long time...

    I'm prepping for my PA and want to know from experienced folks: Can I Just go ahead and get pierced with a 4gauge? I already have my eye on some Titanium segment rings and don't really plan on doing any stretching..
    any and all guidance would be appreciated....

    Could I; if I put together all the needed equip. do it myself?
    Yeah- I have the moxie to DIY it....

    Last edited: Mar 12, 2017
  2. dnd4evr

    dnd4evr Super Moderator Staff Member

    Welcome to the Painful Pleasures (PP) community! Please take a moment to tell us a bit more about yourself in the Introduce Yourself area. Also, please read the Rules of the Forum at your convenience.

    The gallery is available for viewing or posting. Without a login you will be able to see non-mature content, but you will not be able to post there or view mature content.

    If you have any questions about the forum or gallery, feel free to reach out to me or our other moderators, Angel on the Edge, Rainbird, Craftsman and xXJarredXx.

    To keep out unwanted spam messages, all new members must have their first 3 messages approved (vetted) by the moderators before they can post freely.

    The forum has undergone some recent changes. Many were for the good, but it also introduced a bug. When an unvetted member posts to an existing discussion, it does not show up as other posts do. If a fully vetted member posts, the section they post in is highlighted and the thread list has a green dot next to the thread they post in. Also if you click on "new posts" it will show up in the list. Unvetted members do not show at all. The only time an unvetted members post show is if they create a new thread and even then it's not very easy to find. PP is working on getting this fixed, but it may take some time.

    If you post to the forum for help and you don't get a reply you are not being ignored. Please send a private message and include a thread link.

    Typically a PA is 10ga to 6ga. I would imagine you could do a 4ga to start and yes DIY is doable. I did mine (at 10ga).

    Something to keep in mind. The urethra is tough. I mean really tough. When I pierced mine I almost gave up because I was having a hard time getting the needle through. Get a needle pusher along with the other materials (more than just a needle) if you are going to do it yourself. Also the amount of pressure necessary will go up with gauge size.

    At your age you may be on an aspirin regimen. If so, go off it a couple of days before piercing or you will bleed like a stuck pig.
    Last edited by a moderator: Aug 7, 2017

Share This Page